10" wide screen touch panel 16M colors ETH

HMIET6500E is an essential touchscreen panel from Eliwell. This single touch resistive HMI Ethernet panel has high resolution and more colors. This HMI interface is 10.1 inch wide with 16 million colors and 1024 x 600 pixel resolution (SVGA). It is powered by Vijeo Designer Basic software for intuitive user experience. It has a 800 MHz ARM Cortex-A8 CPU, 256 MB as system and application memory, 128 KB nonvolatile memory. This HMI ET6 supports Ethernet port, COM1 (RS-232C), COM2 (RS-422/485), 1x USB 2.0 Type A, and 1x USB 2.0 Micro-B port. Its dimensions are 270.5mm (width) x 200.5mm (height) x 47mm (depth) and weighs 0.98Kg. It is designed for panel mounting by 4 or 6 fastener screws (the quantity of screws depends on screen size). This range is designed with high resolution screen, more colors, and Ethernet capability to enable OEMs to optimize their HMI design and investment. The degree of protection is IP65F.

Part Number
HMIET6500E

Main

Range of product
ET6
Product or component type
Touch panel screen
Software designation
Vijeo Designer Basic
Operating System
VxWorks
Processor name
ARM Cortex-A8

Complementary

Display size
10 inch
Display type
Colour TFT LCD
Display colour
16 million colours
Display resolution
800 x 480 pixels WVGA
Touch panel
Single touch analogue resistive
Brightness
16 levels
Character font
ASCII ASCII (European characters) Chinese (simplified Chinese) Japanese (ANK, Kanji) Katakana Korean Taiwanese (traditional Chinese)
[Us] rated supply voltage
24 V DC +/- 20 %
Inrush current
30 A
Local signalling
Status LED green, steady for operating Status LED orange, steady for software starting up Status LED red, steady for power supply (ON) Status LED, off for power supply (OFF)
Power Draw
11 W
Number of pages
200 application pages
Port Ethernet
10/100BASE
Memory description
Device memory 256 MB User data memory 256 MB Backup memory 128 kB
Integrated connection type
1 COM1 serial link - 1 SUB-D 9-pin male - RS232C (rate: 2400...115200 bps)bottom 1 COM2 serial link - 1 SUB-D 9-pin male - RS422/RS485 (rate: 2400...115200 bps)bottom COM2 serial link (rate: 2400...187500 bps)bottom 1 Ethernetbottom 1 USB 2.0 type Aback 1 USB 2.0 type micro Bback
Power Supply
External supply
Realtime clock
Built-in 0...50 °C Built-in 10...90 % RH
Protocol supported
Modbus Uni-TE Third party protocols
Fixing mode
By 4 screws, mounting on 1.6...5 mm thick panel
Cutout (mm)
255 x 185 mm panel cut dimension
Width (L) Net
271 mm
Height (Ht) Net
201 mm
Depth (P) Net
47 mm
Weight (g) Net
999

Environment

Immunity to microbreaks
5 ms
Enclosure material
PC
Front material
Plastic
Standards
IEC 61000-6-4 IEC 61000-6-2 IEC 61131-2 UL 61010-2-201 CSA C22.2 No 61010-1-201
Product Certifications
CE - UL - EAC (pending) - KC-Mark (pending)
Directives
2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility
Operating Temperature
0…50 °C
Storage Temperature
-20…60 °C
Operating Humidity
10…90% RH non-condensing
Operating altitude
2000 m
IP Grade
IP20 (rear panel) conforming to IEC 61131-2 IP65 (front panel) conforming to IEC 61131-2
Ambient Humidity
10…90 % non-condensing
Shock resistance
147 m/s² for 11 ms (X, Y, Z directions for 3 times) conforming to IEC 61131-2
Vibration resistance
+/- 3.5 mm (f = 5…9 Hz) X, Y, Z directions for 10 cycles (approx. 100 min) conforming to IEC 61131-2 9.8 m/s² (f = 9…150 Hz)
Electromagnetic compatibility
Electrical fast transient/burst immunity test - test level: 2 kV (power ports) conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV (signal ports) Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2 level 3 Electrostatic discharge immunity test - test level: 8 kV (air discharge)
User Guide ET6 Touch Panel
22/09/2025
1.24MB
VijeoDesigner
2.1.0.23
432.36MB